I can’t tell you how many times I’ve walked into a home in the dead of winter and heard some version of this:
“I already tried the reset button.”
That sentence usually comes right after another one:
“I’ve been Googling carrier furnace reset button location for an hour.”
If you’ve ever owned a gas furnace—especially a Carrier—you’ve probably been down that rabbit hole yourself. Searching for the Carrier furnace reset button, wondering where is the reset button on a Carrier furnace, or trying to figure out how to reset a Carrier furnace without making things worse.
And if you’ve ever owned a Carrier Weathermaker 9200, you already know that the so-called reset process is rarely as simple as pressing a button.
That frustration is exactly why more homeowners are asking me about electric furnaces—specifically the Goodman MBVK electric furnace. Because when you remove combustion, ignition, and flame safety from the equation, you also remove most of the reasons people go hunting for reset buttons in the first place.
Let’s talk about why reset buttons exist, why Carrier furnaces seem to need them so often, and why the Goodman MBVK takes a very different—and much simpler—approach.
Why People Keep Searching for the Carrier Furnace Reset Button
Let’s clear something up right away: most modern Carrier furnaces do not have a single, clearly labeled reset button the way people expect.
When homeowners search for:
-
carrier furnace reset button
-
carrier furnace reset switch
-
carrier furnace blower motor reset button
What they’re really trying to do is force a gas furnace out of a safety shutdown.
Gas furnaces are designed to shut themselves down aggressively when something isn’t right. That’s not a flaw—it’s a safety feature. But it also leads to confusion, frustration, and a lot of unnecessary service calls.
Where Is the Reset Button on a Carrier Furnace?
Here’s the honest answer I give customers:
It depends—and sometimes there isn’t one.
Carrier furnaces may have:
-
A rollout switch with a manual reset
-
A limit switch that resets automatically
-
A blower motor thermal overload
-
A control board that locks out after repeated failures
None of these are labeled “RESET” in big friendly letters.
So when someone asks where is the reset button on a Carrier furnace, what they usually mean is:
-
“Which safety switch tripped?”
-
“Why won’t the furnace start again?”
-
“How do I get heat back right now?”
And the truth is, resetting a gas furnace without fixing the underlying problem often just delays the next shutdown.
The Carrier Weathermaker 9200 Reset Button Myth
The Carrier Weathermaker 9200 comes up a lot in these conversations. Homeowners often ask specifically about the Carrier Weathermaker 9200 reset button.
Here’s the reality:
That furnace uses a control board-based lockout system. When ignition fails too many times, the board shuts everything down. The “reset” is usually achieved by:
-
Interrupting power
-
Waiting
-
Restoring power
-
Hoping the fault clears
That’s not a reset button—that’s a workaround.
And when the furnace locks out again a day later, the cycle repeats.
This is one of the reasons the U.S. Department of Energy emphasizes proper diagnosis over repeated resets when dealing with fuel-burning appliances.
How to Reset a Carrier Furnace (And Why It’s Not a Solution)
I get asked how to reset a Carrier furnace all the time. The process usually involves:
-
Turning off power at the breaker or switch
-
Waiting 30 seconds to several minutes
-
Turning power back on
-
Watching the startup sequence
If the furnace runs again, great—for now.
But here’s the problem: resets don’t fix anything. They just clear a symptom.
Common reasons Carrier furnaces lock out include:
-
Dirty flame sensors
-
Weak igniters
-
Draft inducer issues
-
Blocked venting
-
Pressure switch failures
Each of those problems will cause the furnace to shut down again—no matter how many times you reset it.
Why Reset Buttons Exist in the First Place
Reset buttons exist because gas furnaces are complex and potentially dangerous machines.
They burn fuel. They produce exhaust gases. They rely on precise ignition timing. When anything goes wrong, the safest response is to stop operation entirely.
Organizations like the Consumer Product Safety Commission consistently warn that bypassing or repeatedly resetting safety devices on gas furnaces can create serious risks.
That’s not fear-mongering. That’s physics and combustion safety.
Enter the Goodman MBVK Electric Furnace
Now let’s shift gears.
The Goodman MBVK electric furnace doesn’t have:
-
A flame
-
An igniter
-
A gas valve
-
A flame sensor
-
A combustion chamber
-
A vent or flue
Which means it doesn’t need:
-
Flame rollout switches
-
Gas pressure switches
-
Combustion safety lockouts
And most importantly…
It doesn’t leave homeowners searching for reset buttons.
Why Electric Furnaces Rarely Need “Resetting”
The MBVK uses electric resistance heating elements. When there’s a call for heat:
-
Power is applied
-
The elements heat up
-
The blower moves air across them
-
Warm air enters the home
If something goes wrong, the system response is usually simple:
-
A breaker trips
-
A limit opens
-
The system stops safely
Once the issue is resolved, normal operation resumes—no mystery resets, no lockout codes, no flame proving failures.
This simplicity is why ASHRAE often points to electric heating systems as mechanically reliable and inherently safer in residential applications.
Carrier Furnace Blower Motor Reset Button vs. MBVK Blower Design
Another common search term I see is carrier furnace blower motor reset button.
Older Carrier furnaces sometimes used blower motors with internal thermal overloads that could trip and require cooling or manual reset. Modern systems rely more on control boards and sensors—but the confusion remains.
The Goodman MBVK uses a variable-speed ECM blower motor, which offers:
-
Built-in protection
-
Lower operating temperatures
-
Automatic adjustment
-
Fewer thermal overload events
In plain terms: the blower is smarter and less likely to shut itself down unexpectedly.
Why Homeowners Get Trapped in the Reset Loop
Here’s a pattern I see all the time:
-
Furnace shuts down
-
Homeowner searches for reset button
-
Furnace runs again
-
Furnace shuts down again
-
Frustration escalates
This loop is common with gas furnaces and almost nonexistent with properly installed electric systems like the MBVK.
Resetting a furnace should never be routine. If you’re resetting regularly, the system is telling you something is wrong.
Installation Quality Matters—But Complexity Still Counts
Let me be clear: any furnace can fail if installed poorly.
But when installation quality is equal, simpler systems win long-term.
The MBVK benefits from:
-
Modular heat kits
-
Straightforward electrical design
-
No combustion air requirements
-
No venting calculations
That reduces installer error and increases long-term reliability.
Electric Heat and Power Outages: A Fair Question
Some homeowners ask, “What happens if the power goes out?”
The honest answer: both gas and electric furnaces stop working without electricity. Gas furnaces still need power for:
-
Control boards
-
Blowers
-
Ignition systems
So from a reset and reliability standpoint, electric furnaces aren’t at a disadvantage here.
Who Should Consider the Goodman MBVK?
The MBVK is a strong fit for homeowners who:
-
Are tired of chasing reset buttons
-
Own aging gas furnaces like the Weathermaker 9200
-
Want fewer emergency service calls
-
Use or plan to use a heat pump
-
Prioritize safety and simplicity
It’s especially appealing to people who’ve already Googled where is the reset button on a Carrier furnace one too many times.
Final Thoughts from Tony Marino
If you’ve spent cold nights searching for the Carrier furnace reset button, trying to figure out how to reset a Carrier furnace, or wondering why your system keeps locking out, I want you to hear this:
Reset buttons are not solutions. They’re warnings.
The Goodman MBVK electric furnace is designed to avoid the conditions that make reset buttons necessary in the first place. No flame. No gas. No ignition failures. Just heat—when it’s supposed to happen.
After years in the field, I’ve learned this:
The best furnace is the one you never have to reset.
And for many homeowners, that’s exactly what the MBVK delivers.
