Few experiences are more frustrating for a homeowner than when your furnace stops heating, leaving your home cold and uncomfortable. Often, the first thing homeowners think about is the furnace reset button, wondering “how to reset furnace” or “where is the reset button on a furnace?” In this guide, we’ll cover everything you need to know about furnace reset buttons, including the Goodman MBVK electric furnace, and how to safely restart and maintain your heating system.
Whether you’re asking about a blower motor reset button, gas furnace reset button, or wondering “how do you restart an electric furnace”, this guide has you covered.
What Is a Furnace Reset Button?
The furnace reset button is a safety mechanism designed to protect your heating system from overheating or electrical faults. When triggered, it cuts power to the furnace until it is manually reset, preventing damage to:
-
Blower motors
-
Heat strips in electric furnaces
-
Burners and ignition components in gas furnaces
Many homeowners confuse the reset button with a regular on/off switch, but it is specifically a manual safety reset. Repeatedly pressing the button without addressing the underlying problem can cause further damage. (Goodman Manufacturing)
Where Is the Furnace Reset Button Located?
Understanding the furnace reset button location is essential before attempting a reset. Here’s where you typically find it:
-
Electric furnaces (including the MBVK): Behind the service panel near the blower or heat strips
-
Gas furnaces: Near the burner compartment, sometimes on the control board
-
Blower motor reset button: Often integrated into the motor housing
For homeowners searching “where is the reset button on a furnace” or “blower motor reset button location”, look for a small red button labeled RESET. Safety first: always turn off power at the circuit breaker before pressing it. (HVAC.com)
How to Reset a Goodman Furnace
Resetting a furnace is straightforward but requires careful attention:
-
Turn off the furnace power at the circuit breaker.
-
Locate the reset button—typically red and labeled “RESET.”
-
Press and hold the button for 5–10 seconds.
-
Release the button and restore power to the furnace.
-
Observe operation to ensure the furnace runs normally.
This process works for:
-
How to reset electric furnace heater
-
How to restart a furnace
-
How to reset furnace blower motor
-
How to reset gas furnace
It’s important to note that if the reset button on furnace not working, pressing it repeatedly is not a solution—identify the root cause.
Common Reasons the Furnace Reset Button Trips
1. Overheating
Electric furnaces, including the MBVK, have high-limit switches that monitor air temperature. Overheating can be caused by:
-
Dirty air filters
-
Blocked ductwork or vents
-
Blower motor issues
Gas furnaces can also trip due to burner overheating or flame sensor issues. Knowing this helps homeowners understand why the gas reset button may be activated.
2. Electrical Faults
Electrical problems are another common cause for furnace blower motor reset button trips:
-
Loose wiring connections
-
Blown fuses
-
Shorted components in heat strips or burners
Repeated trips signal the need for professional inspection to avoid long-term damage. (The Furnace Outlet)
3. Blower Motor Issues
The blower motor reset button protects the motor from overheating or overload. Common issues include:
-
Motor strain from dirty filters or blocked vents
-
Motor wear and tear
-
Electrical faults in the motor
For questions like “how to reset furnace blower” or “furnace blower reset button”, always ensure the motor is clear of obstructions and functioning properly before resetting.
4. Gas Furnace Considerations
Gas furnace owners may also deal with gas furnace reset button trips. Causes include:
-
Flame sensor failures
-
Burner ignition problems
-
Gas supply issues
Knowing “how to restart gas furnace” safely requires inspecting these components first.
Pictures and Visual Guides
For homeowners searching “picture of reset button on Goodman furnace” or “where is the reset button on electric furnace”, visual references can be helpful:
-
MBVK furnaces typically have the reset button near the blower compartment, accessible after removing the service panel.
-
The button is red, labeled RESET, and may be recessed to prevent accidental activation.
-
Blower motor reset buttons are smaller and located on the motor housing itself. (Goodman Manuals)
Step-by-Step Guide to Resetting Different Furnace Types
Electric Furnace Reset
-
Turn off breaker power
-
Locate the reset button on electric furnace
-
Press and hold for 5–10 seconds
-
Restore power
-
Monitor operation
Gas Furnace Reset
-
Turn off the gas supply and breaker power
-
Locate the gas furnace reset button near the burner or control board
-
Press and hold for 5–10 seconds
-
Turn on gas supply and restore power
-
Observe flame ignition and operation
For both systems, if repeated trips occur, avoid constant resetting—troubleshoot the underlying issue.
Troubleshooting Reset Button Problems
Common scenarios and solutions include:
| Issue | Possible Cause | Recommended Action |
|---|---|---|
| Reset button keeps tripping | Overheating, clogged filter, blocked vents | Replace filters, clear vents, inspect blower |
| Reset button not working | Electrical failure | Call licensed HVAC technician |
| Furnace blower motor reset | Motor overload | Inspect motor, clear obstructions, test electrical connections |
| Gas furnace reset trips | Flame sensor, burner issue | Clean flame sensor, inspect burners |
Safety Tips for Using the Furnace Reset Button
-
Always turn off power at the breaker before pressing the reset button
-
Never press repeatedly without addressing root issues
-
Inspect furnace components regularly
-
Schedule professional maintenance if issues persist
Safety is paramount, whether dealing with an electric furnace reset switch, gas furnace reset button, or blower motor reset button.
Preventive Maintenance to Reduce Reset Button Trips
-
Replace filters every 1–3 months
-
Clean ductwork and vents
-
Inspect and test blower motors
-
Verify thermostat function
-
Conduct annual professional furnace inspection
Preventive care keeps your MBVK running efficiently and minimizes the need for heater reset button intervention. (Energy Star)
Conclusion: Mastering Your Goodman MBVK Furnace Reset Button
Understanding your furnace reset button, its location, and proper use is key to maintaining a reliable heating system. Homeowners often ask:
-
Where is the furnace reset button located?
-
How to reset furnace blower motor?
-
Is there a reset button on a furnace?
-
How to restart an electric furnace?
By following proper safety procedures and performing regular maintenance, the Goodman MBVK electric furnace delivers safe, efficient, and reliable heating without the frustration of repeated reset trips.
Whether you are dealing with gas furnace reset button issues, learning how to reset electric furnace, or trying to understand blower motor reset button location, proper knowledge and care ensure long-term performance and home comfort.
