If you’ve found yourself searching things like:
-
carrier furnace reset button
-
carrier furnace reset button location
-
how to reset carrier furnace
-
carrier weathermaker 9200 reset button
-
where is the reset button on a carrier furnace
-
carrier furnace reset switch
-
carrier furnace blower motor reset button
there’s a very good chance you’re cold, frustrated, and staring at a furnace that isn’t doing what you expect.
And I’m going to say something right out of the gate that might feel uncomfortable—but it will save you a lot of wasted time:
If you have a Goodman MBVK electric furnace setup, most Carrier furnace reset-button advice does not apply to your system at all.
This is Jake Lawson talking, and today we’re going to untangle a very common mess: why people with electric furnaces (especially Goodman MBVK systems) keep landing on Carrier gas furnace reset instructions, what those reset buttons actually are, and how to properly restart and troubleshoot an electric furnace without chasing hardware that doesn’t exist.
This is a long one—but by the end, you’ll understand exactly why you can’t find the reset button you’re looking for, and what you should be doing instead.
Why Carrier furnace reset buttons dominate search results
Carrier is one of the most well-known furnace manufacturers in North America, and for decades they produced popular gas furnaces like the Carrier Weathermaker 9200. Those systems are everywhere, and many of them do include manual-reset safety switches.
That’s why searches like carrier weathermaker 9200 reset button and carrier furnace reset switch are so common.
The problem?
Those searches assume:
-
a gas furnace,
-
with burners,
-
flame safety devices,
-
and manual-reset limits.
If your system is a Goodman MBVK electric furnace, none of that exists in your equipment.
So let’s back up and define the playing field before we talk about reset buttons.
The Goodman MBVK is not a Carrier furnace (and not a gas furnace)
The Goodman MBVK is an air handler platform that becomes an electric furnace when paired with electric resistance heat strips.
That means:
-
no gas line
-
no burners
-
no flame sensor
-
no igniter
-
no pilot light
-
no combustion chamber
Goodman is very clear about this in how they categorize and market the MBVK series. It’s designed as a modular air handler with optional electric heat—not as a gas furnace cabinet. You can see that positioning directly on Goodman’s official product page. (Goodman MBVK Series overview)
So when someone with an MBVK system searches where is the reset button on a carrier furnace, they’re already looking in the wrong category of equipment.
Why people mix Carrier reset advice with Goodman systems
This confusion usually comes from one of three places:
-
Previous home had a Carrier gas furnace
-
Online advice doesn’t distinguish gas vs electric
-
The word “furnace” gets used for everything
To a homeowner, heat is heat. If the house is cold, it must be “the furnace.” But HVAC hardware doesn’t work that way.
A reset procedure that makes sense on a Carrier Weathermaker 9200 gas furnace can be meaningless—or even harmful—on a Goodman MBVK electric furnace.
What a Carrier furnace reset button actually is
Let’s talk about what people are really referring to when they search carrier furnace reset button location.
On many Carrier gas furnaces, the “reset button” is actually one of the following:
1. Manual-reset rollout switch
This trips if flames roll out of the burner area. It’s a serious safety event and requires investigation before reset.
2. Manual-reset high-limit switch
This trips if the furnace overheats beyond safe limits, often due to airflow problems.
3. Blower motor thermal overload
Some older blower motors include a manual reset that trips when the motor overheats.
On gas furnaces, pressing these buttons after fixing the cause can restore operation.
That’s why carrier furnace blower motor reset button searches exist—and why pictures online often show a small red or black button.
Why Goodman MBVK electric furnaces don’t have these buttons
Here’s the key difference:
Electric furnaces do not manage flame.
Because of that:
-
there are no rollout switches,
-
no flame-proving safeties,
-
no burner-related reset buttons.
Instead, electric furnaces rely on:
-
automatic-reset high limits,
-
one-time thermal cutoffs,
-
electronic controls,
-
and power interruption for reset.
Goodman’s MBVK installation documentation makes no mention of a manual reset switch because the system isn’t designed for homeowner reset via button. (Goodman MBVK installation manual)
So where is the reset button on a Carrier furnace… and why you can’t find it
Let’s answer the keyword directly:
Where is the reset button on a Carrier furnace?
On certain Carrier gas furnaces, it may be:
-
near the burner assembly,
-
on the blower housing,
-
on a rollout switch,
-
or on a motor thermal overload.
But on a Goodman MBVK electric furnace:
There is no reset button to find.
That’s not an oversight. It’s intentional.
Why pressing reset buttons is discouraged on electric furnaces
Electric resistance heat draws massive current and heats extremely fast. If something goes wrong, the system is designed to shut down automatically and only restart when conditions are safe again.
Allowing repeated manual resets would:
-
mask airflow problems,
-
risk overheating,
-
damage heat elements,
-
and create unsafe conditions.
That’s why most electric furnace safeties either:
-
reset automatically when safe, or
-
permanently disable the circuit until repaired.
The U.S. Department of Energy explains that electric resistance heating systems rely heavily on proper airflow and electrical protection for safe operation. (DOE electric resistance heating overview)
Why people think their MBVK “needs a reset”
When someone with an MBVK system says:
“I just need to reset it like my old Carrier furnace,”
what’s actually happening is usually one of these:
1. Breaker tripped
Electric heat strips often have their own breakers. If one trips:
-
the blower may still run,
-
but there will be no heat.
This feels like the furnace “won’t turn on.”
2. High-limit switch opened
Restricted airflow causes the heat strips to overheat. The system cuts power to the heat while letting the blower run.
Again, it feels like a shutdown that needs a reset.
3. Thermostat staging confusion
If the MBVK is paired with a heat pump, the thermostat may be calling for heat pump operation—not electric heat—leading to lukewarm air and panic.
The correct way to “reset” a Goodman MBVK electric furnace
If you’re searching how to reset carrier furnace but you actually own an MBVK, here’s the process you should follow instead.
Step 1: Turn the thermostat OFF
Not down. OFF.
Step 2: Turn OFF all HVAC breakers
This usually includes:
-
blower/control breaker
-
one or more heat-strip breakers
Step 3: Wait 3–5 minutes
This allows:
-
control boards to power down,
-
relays to disengage,
-
automatic safeties to reset if conditions allow.
Step 4: Replace the air filter
This step solves more problems than any “reset button” ever could.
Step 5: Restore power
Turn breakers back ON.
Step 6: Turn thermostat back to HEAT
Observe operation.
If heat fails again, stop resetting. The system is protecting itself.
What about blower motor reset buttons?
This is where searches like carrier furnace blower motor reset button muddy the water.
Some older blower motors—especially in legacy gas furnaces—had manual thermal overload resets.
Most modern MBVK systems use:
-
ECM motors,
-
electronic protection,
-
self-resetting logic.
If the blower isn’t running:
-
power cycling is the reset,
-
repeated failures indicate motor or control issues.
There is usually no button to push.
Why Carrier Weathermaker advice is especially misleading
The Carrier Weathermaker 9200 is a high-efficiency gas furnace with:
-
burners,
-
inducer motor,
-
flame safety systems,
-
venting.
Advice written for it assumes combustion.
Applying that advice to an electric furnace is like trying to fix a microwave using gas stove instructions.
Different tools. Different risks.
When to stop DIY resets and call for service
If your MBVK system:
-
repeatedly loses heat,
-
trips breakers,
-
shuts down after short cycles,
-
smells hot or electrical,
you’re past “reset” territory.
At that point, a technician needs to:
-
measure airflow,
-
check static pressure,
-
verify heat-strip staging,
-
inspect electrical components.
Repeated power cycling without diagnosis can make things worse.
The Jake Lawson bottom line
Let’s close this out clearly.
-
Carrier furnace reset buttons exist on some gas furnaces
-
Goodman MBVK electric furnaces do not have them
-
Searching carrier furnace reset button location won’t help an MBVK owner
-
Electric furnaces reset through power cycling, not buttons
-
If the system keeps shutting down, it’s protecting itself
If you stop chasing Carrier gas furnace advice and start treating your MBVK like the electric system it is, troubleshooting becomes logical instead of frustrating.
And once you understand why there’s no reset button to find, you’ll never waste another cold night looking for one.
