If your mobile home furnace is on its last leg, you’re probably asking the big question:
👉 “How much will it cost me to replace it in 2025?”
The Revolv MG1E 80 AFUE 56,000 BTU downflow furnace is one of the most common mobile home furnaces on the market. It’s HUD-approved, built to fit tight utility closets, and designed to work with floor duct systems.
But just like buying a car, the sticker price isn’t the full story. You’ll need to factor in labor, permits, parts, and a few possible extras.
In this guide, I’ll break down the real-world costs of installing a Revolv 80 AFUE furnace in 2025, give you price ranges for different scenarios, and share some of my own money-saving tips.
📦 Furnace Price: What the Unit Costs in 2025
The base price of the furnace itself is the starting point.
-
Revolv MG1E 56,000 BTU Downflow Furnace: $1,500–$2,000 (unit only).
-
Pricing depends on the distributor, whether you buy online, and if the seller includes add-ons like flue kits or installation hardware.
Comparisons with Other Brands
-
Miller: $1,800–$2,400 (similar 80 AFUE model).
-
Intertherm: $1,700–$2,300.
-
Coleman: $2,000–$3,000.
👉 Revolv tends to be $300–$500 cheaper than Coleman or Miller for the same size furnace.
🛠️ Installation Labor Costs
The furnace is only half the cost — labor is where things add up.
-
Professional installation: $1,500–$3,000.
This includes:
-
Disconnecting and removing the old furnace.
-
Setting the new unit in place.
-
Connecting to the plenum and ducts.
-
Gas line hookup and pressure testing.
-
Electrical wiring and thermostat connection.
-
Venting through the roof.
-
Safety checks and startup.
Labor is higher if:
-
You live in a high-cost labor area (like California or the Northeast).
-
The old furnace is a different size and requires plenum modifications.
-
The installer finds duct damage that needs repair.
👉 On average, labor costs just as much as the furnace itself.
DOE – Furnace Installation Basics.
📋 Permit & Inspection Fees
Most municipalities require a permit for furnace installation. This ensures safety and HUD compliance.
-
Typical cost: $100–$500.
-
Covers inspection of gas line connections, venting, and ductwork.
Some areas roll inspection into labor quotes, others require you to pay the city directly.
👉 My advice: Always pull a permit. Skipping one could bite you later when selling your home.
HUD Manufactured Housing Standards.
⚠️ Hidden or Extra Costs
Here’s where homeowners get caught off guard:
1. Ductwork Repairs or Sealing
-
Mobile home ducts are in the belly of the home. If they’re leaky, your furnace will waste heat.
-
Cost: $300–$800 for sealing and repairs.
2. Thermostat Upgrade
-
Older mechanical thermostats can be replaced with digital or smart models.
-
Cost: $150–$400.
3. Venting/Flue Modifications
-
If your old furnace was a different brand, the flue pipe may not line up.
-
Cost: $200–$600 for adjustments or new vent kit.
4. Old Furnace Removal/Disposal
-
Hauling away the old unit usually isn’t free.
-
Cost: $150–$300.
5. Electrical Panel Updates
-
Rare, but if wiring is outdated, you may need upgrades.
-
Cost: $300–$800.
👉 Budget at least 10–20% extra for surprises.
📊 Total Installed Cost Range for 2025
Here’s what most homeowners can expect to pay:
| Scenario | Furnace Cost | Labor | Extras | Total |
|---|---|---|---|---|
| Low-End (basic swap) | $1,500 | $1,500 | $0–$200 | $3,000–$3,200 |
| Average Install | $1,700 | $2,000 | $500–$800 | $3,500–$4,000 |
| High-End (repairs & upgrades) | $2,000 | $3,000 | $1,000+ | $5,000+ |
👉 Most homeowners in 2025 spend around $3,500–$4,000 total for a Revolv 80 AFUE furnace installation.
🌎 Regional Differences in Cost
Where you live affects the price:
-
Midwest & South: Lower labor rates → installs often under $3,500.
-
Northeast & West Coast: Higher labor costs → $4,000–$5,000 typical.
-
Rural areas: Travel fees may apply if installers are far away.
👉 Always get at least 3 quotes to see where your local market sits.
Better Business Bureau HVAC guide.
👨🔧 Tony’s Money-Saving Tips
I’ve seen too many homeowners overpay. Here’s what I recommend:
-
Do the prep work yourself. Remove the old furnace (if you can do it safely), clear the closet, and seal ducts before the pro shows up.
-
Don’t overbuy. An 80 AFUE is plenty for most mobile homes unless you live in extreme northern climates.
-
Shop around. Get multiple quotes. I’ve seen the same install range from $3,200 to $4,800.
-
Check for rebates. Some gas utilities still offer small rebates ($100–$300) for installing HUD-approved furnaces.
♻️ Rebates & Incentives in 2025
One downside of 80 AFUE furnaces: they usually don’t qualify for federal tax credits (which favor 95%+ high-efficiency models).
But you may find:
-
Utility company rebates ($100–$300 for upgrading to a new furnace).
-
Local programs in colder regions promoting efficient heating.
👉 It’s worth checking with your local gas provider before you buy.
✅ Final Takeaway
In 2025, installing a Revolv 80 AFUE 56,000 BTU furnace will typically cost:
-
$3,000 on the low end (basic swap).
-
$3,500–$4,000 for most homeowners.
-
$5,000+ if major duct/vent work is needed.
👉 Revolv is one of the most affordable mobile home furnace options — and with its HUD-approved design and wide parts availability, it’s a smart choice for most mobile home owners.
In the next topic we will read more about: Maintenance Guide: How Tony Keeps His Revolv Furnace Running Smooth
