When your furnace stops working, one of the most common culprits is the hot surface ignitor (HSI). For Goodman and Amana furnaces, one of the most widely used replacement parts is the Goodman 0130F00008S Hot Surface Ignitor. But before you buy, you need to answer a critical question:
👉 Is this ignitor compatible with your furnace model?
This guide breaks down compatibility, explains why using the correct part matters, and helps you confidently replace your furnace ignitor.
🔥 What Is the Goodman 0130F00008S Ignitor?
The Goodman 0130F00008S is a silicon nitride hot surface ignitor, designed as an OEM (original equipment manufacturer) replacement. Compared to older silicon carbide ignitors, silicon nitride versions are:
-
✅ More durable
-
✅ Longer-lasting (up to 10 years under normal use)
-
✅ Resistant to cracking and oxidation
-
✅ Designed to match Goodman/Amana control board specs
Because ignition parts operate under extreme heat and electrical loads, using the exact replacement specified by the manufacturer ensures safety, efficiency, and warranty compliance.
For more technical details on ignition systems, see ACHR News: Troubleshooting Furnace Ignition Systems.
📋 Which Furnaces Use the Goodman 0130F00008S?
This ignitor is designed for a wide range of Goodman and Amana gas furnaces. While Goodman doesn’t always print compatibility lists directly on the part, here are the categories and model series where this ignitor is typically found:
✅ Goodman Furnace Series
-
GMV Series (Goodman Variable-Speed)
-
GMH Series (Goodman Multi-Speed)
-
GKS9 / GKS8 Models
-
GMEC96, GMVC96, and GMVM97 High-Efficiency Furnaces
-
Older Goodman units originally shipped with silicon carbide ignitors (retrofitted with 0130F00008S upgrades)
✅ Amana Furnace Series (sister brand to Goodman)
-
AMH95 & AMVC95 Models
-
AMSS92 & AMVC96 Models
-
AMEC96 and AMVM97 Series
✅ Other Allied/Daikin-Branded Units
Since Goodman is part of Daikin Comfort Technologies, some Daikin and Allied furnaces also use the 0130F00008S ignitor.
⚠️ Important: Always check your furnace’s owner’s manual or the part number stamped on the ignitor you’re replacing before purchasing.
For cross-reference charts, check Goodman’s official technical support site.
🔎 How to Check Compatibility Yourself
Not sure if this ignitor fits your furnace? Here are the steps:
-
Find Your Furnace Model Number
-
Located on the inside of the furnace cabinet door or on the rating plate.
-
-
Search in the Goodman/Amana Parts Manual
-
Cross-reference your model number with the part list (0130F00008S should be listed if compatible).
-
-
Check Your Current Ignitor
-
Carefully remove (power off first). Look for part numbers printed on the ceramic base.
-
-
Confirm with the Distributor
-
Many online retailers like The Furnace Outlet provide compatibility lookups.
-
For an example of part lookup, see RepairClinic’s Goodman Ignitor Finder.
⚠️ Why Compatibility Matters
Installing the wrong ignitor can cause:
-
🔥 Failure to Ignite – Wrong resistance rating means the ignitor won’t heat correctly.
-
⚡ Control Board Damage – Incorrect voltage can burn out the furnace’s circuit board.
-
🛑 Warranty Issues – Using non-approved parts may void manufacturer coverage.
-
💸 Wasted Money – The wrong ignitor often fails quickly, requiring another replacement.
That’s why Goodman designed the 0130F00008S as a drop-in OEM replacement — ensuring proper operation every time.
🛠️ Replacing Your Furnace Ignitor
If you’ve confirmed compatibility, here’s a quick outline of replacement:
-
Shut off power and gas to the furnace.
-
Remove the front access panel.
-
Locate the ignitor (near the burners).
-
Disconnect the wiring harness.
-
Remove screws holding the ignitor in place.
-
Install the new 0130F00008S ignitor (avoid touching the tip).
-
Reconnect wiring, replace panel, restore power/gas.
-
Test furnace operation.
🛑 Reminder: Ignitors are fragile. Handle with care and don’t overtighten.
For a step-by-step illustrated guide, see Family Handyman’s furnace repair tutorial.
🧰 Maintenance Tips to Extend Ignitor Life
Even with the right part, poor maintenance shortens ignitor lifespan. Here’s how to get the most out of it:
-
Change furnace filters regularly (dust = ignitor wear)
-
Avoid touching the ignitor surface (skin oils cause hot spots)
-
Keep furnace voltage stable (consider surge protection)
-
Schedule annual professional tune-ups
For maintenance best practices, check Energy Star’s HVAC care guide.
✅ Final Savvy Homeowner Takeaway
The Goodman 0130F00008S Hot Surface Ignitor is one of the most widely compatible furnace parts for Goodman and Amana systems. If your furnace isn’t lighting and you’ve confirmed the symptoms point to the ignitor, this OEM replacement is the right choice.
-
🔹 Works with most Goodman GMV, GMH, GKS, GMEC96, GMVC96, and GMVM97 series furnaces
-
🔹 Also compatible with Amana AMH95, AMVC95, AMSS92, and newer high-efficiency models
-
🔹 Ensures safe, reliable ignition every heating cycle
👉 Always cross-check your furnace model number before ordering. Keeping a spare 0130F00008S on hand is a smart, Savvy homeowner move — ensuring you’re never left in the cold.
In the next topic we will know more about: Installation Guide: How to Replace a Goodman Hot Surface Ignitor
