Hey folks, Jake Lawson here. You know me—I’ve spent decades crawling through attics, sweating in crawl spaces, and giving honest advice to homeowners who just want to be cool in the summer and warm in the winter without getting fleeced. Today, we’re digging deep into a cooling system I actually recommend to clients: the Goodman 3 Ton AC Unit with Coil, specifically the Goodman 3 Ton 14.5 SEER2 R-32 Bundle you can find right here at The Furnace Outlet.

If you’re here researching Goodman 3 ton AC coil options or figuring out whether a full Goodman 3 ton AC unit with coil is right for your home, you’re in good hands. Let’s break down the specs, compare options, talk refrigerants, and even highlight why buying bundled just makes plain sense.


What Does a 3 Ton AC Unit Actually Mean?

First off, let’s clear up a little confusion. A 3-ton AC unit isn’t three tons of metal (though sometimes it feels that way when I’m hauling one off a truck). It refers to cooling capacity—specifically, 36,000 BTUs per hour. That’s the amount of heat the system can remove from your home in an hour.

A properly matched Goodman 3 ton AC unit with coil is ideal for homes around 1,500 to 2,100 square feet, depending on insulation, layout, ceiling height, and climate zone.

Want a more scientific breakdown? Check out this HVAC sizing guide from the U.S. Department of Energy to match BTUs to your home size.


Why You Need a Matched Coil

A lot of homeowners try to cheap out and just replace the outdoor condenser. That’s a rookie mistake. If your Goodman 3 ton condenser doesn’t match the indoor coil, you could:

  • Lose efficiency (pay more in energy bills)

  • Get reduced cooling performance

  • Risk compressor failure (and that’s a pricey fix)

Goodman designs systems like the one in this 14.5 SEER2 R-32 bundle so the coil and condenser work in perfect harmony. You’re not just getting parts—you’re getting a system.

And speaking of system harmony, R-32 refrigerant is the game-changer here.


R-32: The Next Evolution in Refrigerants

Let’s talk refrigerant. The Goodman 3 Ton SEER2 system uses R-32, which is quickly replacing R-410A across the board. Why does that matter?

Lower Global Warming Potential
R-32 has a GWP of 675—almost a third of R-410A's 2,088.

Improved Efficiency
R-32 systems run leaner, cooler, and with less charge required per ton.

Fewer Emissions Over Time
Because it’s a single-component refrigerant, it’s easier to recycle and manage long-term.

Daikin was the first to champion R-32, and now brands like Goodman are adopting it across their lineup, especially for 2025+ compliance.

Bottom line: If you’re buying a new system today, get one with R-32. It’s better for the planet and better for your wallet over time.


What’s in the Goodman 3 Ton R-32 Bundle?

This is where The Furnace Outlet really knocks it out of the park. Their Goodman 3 ton AC unit with coil bundle includes:

  • GLXS4BA3610: A 3 Ton, 14.5 SEER2 R-32 Condenser

  • AMST36CU1300: Air Handler with pre-matched coil

This bundle is fully AHRI-matched, meaning it qualifies for efficiency ratings and local energy rebates in many areas.

If you’re new to SEER2, check out this excellent explainer from Trane Residential that breaks down how it’s different from SEER and why it matters for performance ratings.


Installation Considerations: Don’t DIY This One

Listen, I know YouTube makes everything look easy. But unless you’re a licensed HVAC technician with EPA certification, don’t attempt to install a charged system on your own. Trust me—I’ve seen too many homes damaged and warranties voided from DIY mishaps.

Here’s what your HVAC tech should do during install:

  1. Confirm system sizing (Manual J Load Calculation)

  2. Set vacuum pressure and refrigerant levels properly

  3. Calibrate the thermostat to avoid short cycling

  4. Ensure proper airflow (static pressure testing)

If you want to know more about what professional installation really entails, this HVAC Installation Checklist from Energy Star breaks it down in pro terms.


How It Compares to Other Goodman Models

Let’s say you’re considering something smaller or larger. Goodman has a strong lineup, including:

  • Goodman 2 Ton AC Unit – Best for homes around 1,000–1,300 sq ft

  • Goodman 4 Ton and 5 Ton Units – For homes over 2,200+ sq ft

If you’re debating between a 2 ton and a 3 ton, you’re not alone. Here’s a side-by-side comparison:

Feature Goodman 2 Ton Goodman 3 Ton
BTUs 24,000 36,000
Typical Sq Ft Coverage ~1,000–1,300 ~1,500–2,100
SEER2 Options 13.4 – 15.2 14.5 – 17
Cost Range $2,000 – $2,800 $2,500 – $3,500

If you want a deeper dive into Goodman’s AC units by size, I recommend reading this comprehensive review from Modernize on the best central air conditioners for 2025.


Why Buy the Bundle from The Furnace Outlet?

Three reasons:

  1. Pre-matched, AHRI-rated – No guesswork on compatibility.

  2. No middlemen – Prices stay low.

  3. Excellent warranty – Goodman offers up to a 10-year parts limited warranty when registered properly.

And if you need help picking the right size, The Furnace Outlet has a sizing calculator and live tech support to walk you through it.


Final Thoughts from Jake

If you’re shopping for a Goodman 3 ton AC coil, skip the hassle of piecing it together. Get the full Goodman 3 ton AC unit with coil in one tight, performance-optimized bundle from The Furnace Outlet.

✅ Reliable performance
✅ High efficiency with R-32
✅ Ready for rebates and future EPA compliance
✅ Peace of mind with full Goodman warranty

I’ve installed dozens of these systems, and they’re a solid investment—whether it’s your forever home or a rental property you want to set and forget.

So if you’re ready to upgrade your home comfort, take a closer look at this Goodman 3 Ton 14.5 SEER2 R-32 Bundle. It’s one of the smartest buys on the market today.

Stay cool out there,
–Jake Lawson

The comfort circuit with jake

Leave a comment

All comments are moderated before being published