Pros and Cons of R32 in AC and Gas Furnace Systems

The heating, ventilation, and air conditioning (HVAC) industry is continuously evolving to adopt more energy-efficient and environmentally friendly technologies. One significant change is the introduction of R32 refrigerant in air conditioning (AC) and gas furnace systems. This article explores the pros and cons of R32, its impact on the environment, and the regulatory changes influencing its adoption, such as the Montreal Protocol, the American Innovation and Manufacturing (AIM) Act, and the 2023 change to SEER2 standards.

The most common system paring for Split systems is an Air conditioner condenser paired with a natural gas furnace,  these systems are usually sized by Air conditioner tonnage and Furnace BTUS,  Available in 1.5 Ton, 2 Ton, 2.5 Ton, 3 Ton, 3.5 Ton, 4 Ton and 5 Ton ranges,  and 30,000 BTUS, 40,000 BTUS, 60,000 BTUS, 80,000 BTUS, 100,000 BTUS, and 120,000 BTUS furnace Ranges. 

Don’t forget to check out our most popular systems ranging between 14.3 SEER2 and 15 SEER2.

What is R-32 Refrigerant?

R32 (difluoromethane) is a single-component refrigerant with a low global warming potential (GWP) and is becoming popular in HVAC systems. It serves as an alternative to R410A, a commonly used refrigerant with a higher GWP.

Pros of R-32 Refrigerant

Environmental Benefits

One of the primary advantages of R32 is its lower GWP, approximately one-third that of R410A. This reduction significantly decreases the environmental impact of HVAC systems using R32, aligning with global efforts to reduce greenhouse gas emissions. For more details on environmental benefits, visit energy.gov.

Improved Energy Efficiency

R32 is known for its high energy efficiency. Systems using R32 consume less energy while delivering the same cooling or heating capacity as those using R410A. This improved efficiency can lead to lower energy bills for consumers.

Ease of Use

R32 is a single-component refrigerant, making it easier to handle and recycle compared to blended refrigerants like R410A. It also requires less refrigerant charge, reducing overall system costs.

Compliance with SEER2 Standards

The 2023 change to SEER2 (Seasonal Energy Efficiency Ratio 2) standards emphasizes the need for higher energy efficiency in HVAC systems. R32's efficiency aligns well with these new standards, making it a favorable choice for manufacturers and consumers aiming to comply with the latest regulations.

Cons of R32 Refrigerant

Flammability

One of the primary concerns with R32 is its flammability. R32 is classified as an A2L refrigerant, indicating low toxicity but mild flammability. While modern systems are designed to mitigate these risks, it remains a concern for some consumers and technicians.

Availability and Cost

Although R32 is becoming more common, its availability may still be limited in some regions compared to traditional refrigerants like R410A. Additionally, the initial cost of transitioning to R32 systems can be higher due to the need for compatible equipment and training for technicians.

Compatibility

Not all existing HVAC systems are compatible with R32. Consumers may need to invest in new systems or retrofit existing ones to accommodate this refrigerant, leading to higher upfront costs.

Regulatory Influence: Montreal Protocol and AIM Act

Montreal Protocol

The Montreal Protocol, an international treaty signed in 1987, aims to phase out substances that deplete the ozone layer, including chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs). This treaty has significantly influenced the development and adoption of alternative refrigerants like R32.

AIM Act

The American Innovation and Manufacturing (AIM) Act, passed in 2020, mandates the phasedown of hydrofluorocarbons (HFCs) in the United States. This act aligns with the global effort to reduce HFCs under the Kigali Amendment to the Montreal Protocol. The AIM Act's phasedown schedule encourages the adoption of low-GWP refrigerants like R32 to meet environmental targets.

Conclusion

R32 refrigerant offers numerous advantages for AC and gas furnace systems, including improved energy efficiency and reduced environmental impact. However, considerations such as flammability, availability, and compatibility must be addressed. Regulatory frameworks like the Montreal Protocol and the AIM Act are pivotal in driving the transition to environmentally friendly refrigerants. As the HVAC industry evolves, R32 is poised to play a significant role in shaping the future of energy-efficient and sustainable heating and cooling solutions.

For more information on HVAC systems and regulations, visit AHRI Directory and EPA.gov.